************************************************************************* * * * CONFIGURATION FILE FOR FUNNELWEB EDITOR -- INSTALL PROGRAM * * * * Modified May/95 for Vn 5.20 Multi-file EVRAM Editor * * Use same issue INSTALL and ED/EE/EF files * * For use with current issue Vn 5.20 (80 col) only * * * *-----------------------------------------------------------------------* * Any line beginning with a blank or an asterisk is ignored by the * * INSTALL program. All that you need to retain in working copies * * are just the lines with actual entries. Trailing comments may be * * used in all lines except pathname and printer codes. INSTALL * * places the same form of configuration block near the start of any * * ED file that is being customized. These entries are then used or * * ignored by the entry code in the specific version. The order and * * form of entries in this block do not necessarily match that in * * this configuration data file, so it is easier to use INSTALL than * * to attempt patching ED directly. * *-----------------------------------------------------------------------* * An abbreviated form is given at the end of this file. Even this is * * more than necessary as ultimately only the entries, one per line, * * are needed, but a few comments will not exceed minimum file size. * *-----------------------------------------------------------------------* * INSTALL must be loaded in the Funnelweb environment, and will * * otherwise immediately return to the title screen. Load as an * * Option 2 GPL program file. * * * ************************************************************************* *-----------------------------------------------------------------------* * Line # 1 -- Y ->> Bring up user select at entry to Editor. * N ->> Bypass user select screen unless * detected at entry. * N *-----------------------------------------------------------------------* * Line #2 -- 1 ->> Default language command text, and CHAR@1 * 8-bit character set, loaded at entry. * 2 ->> All-Characters mode with national language * and character sets. 8-bit characters from * CHAR@<1-8> and language/command file from * FXTNE. * 3 ->> TI Euro-Writer mode. Uses character files * CHAR1 and command files F8TXE. * * The first entry is for the Word Processor and the * second for the Program Editor. Do NOT space * between the entries. 7-bit only modes are no * longer explictly present. A single entry will be * duplicated. 11 *-----------------------------------------------------------------------* * Line #3 -- 1 ->> Australia/USA - default mode * 2 ->> Britain * 3 ->> France * 4 ->> Deutschland * 5 ->> Italia * 6 ->> Sverige * 7 ->> Nederland * 8 ->> Espana * * The first entry is for the Word Processor and the * second for the Program Editor. Do NOT space between * the entries. 11 *-----------------------------------------------------------------------* * line #4 -- 0 ->> Cancel any attempt to load HELP8W or P file. * 1 ->> Load HELP8W or HELP8P file. * 1 *-----------------------------------------------------------------------* * Line #5 -- 1 ->> Set NTSC (60 Hz) on entry to Editor. * 2 ->> Set PAL (50 Hz) on entry. * 1 *-----------------------------------------------------------------------* * Line #6 -- 1 ->> Set NTSC (60 Hz) on exit from Editor. * 2 ->> Set PAL (50 Hz) on exit. * 1 *-----------------------------------------------------------------------* * Line #7 -- 00 ->> No VDP ERAM installed (standard Geneve, some AVPC) * -- First entry is for Word Processor, second for Program * Editor. * * 1 ->> single 128 Kb text buffer * 2 ->> dual 64 Kb text buffers * 3 ->> quad 32 Kb text buffers * * If the Editor entry code fails to verify the presence * of VDP ERAM, this setting will be ignored and a * single 64 Kb buffer model used. A single entry will * be duplicated. 12 *-----------------------------------------------------------------------* * Line #8 -- 0 ->> implies no specific entry and the Funnelweb utility * pathname will be installed instead by the Editor * entry code. * -- PATHNAME. * ->> where this is any legitimate hard disk path or disk * volume name (as would be used in a BASIC language * catalog routine). It MUST end with a "." and be * less than 42 characters long, and obviously must not * start with a "0". * DSK5. *-----------------------------------------------------------------------* * Line #9 -- Forces tab record written out from Word Processor (Pr/Ed * does not save tabs to file) in All-Characters mode to the * type specified. This Editor is not sensitive to tab type, * but the original TI-Writer and Eu-Wr Vn 2.0 were fatally * incompatible. This option will allow you to set the tab * type in the All/Chars mode to match either language mode * for international recipients of your files who have not * seen the light to use the latest Funnelweb Editors. * * This option is currently not configurable from the entry * screens, and must be set by INSTALL. * * -- 0 ->> USA TI-Writer tab record type in All-Chars * * -- 1 ->> European version tab records in All-Chars 0 *-----------------------------------------------------------------------* * Line #10 -- Start line with P as flag, followed by the printer start * sequence. This is to be entered as characters using * special character mode as necessary. Do not * enter trailing comments on the line. A maximum of 24 * characters after the P will be accepted. Do NOT space * between the P and the codes. P *-----------------------------------------------------------------------* * Line #11 -- Start line with Q as flag, followed by the printer reset * sequence. This is to be entered as characters using * special character mode as necessary. Do not * enter trailing comments on the line. A maximum of 24 * characters after the Q will be accepted. Do NOT space * between the Q and the codes. Q *-----------------------------------------------------------------------* * That's all folks ! INSTALL/ED will have quit reading the file after * the last entry * ************************************************************************* ************************************************************************* * Now for a shorter version, but still with comments * that could be used instead. *-----------------------------------------------------------------------* * Comment away, as long as it still fits in a minimum size file !! N User select 11 Mode (1-3) - default W/P and P/E 11 Lang (1-8) 1 Help (0-1) - load help 1 NTSC/PAL in 1 NTSC/PAL out 12 W/P 128 Kb, P/E 2x64 Kb DSK5. 0 USA Tab record P Q