****************************************
*                                      *
*    CONFIGURATION FILE FOR EDITOR     *
*    -----------------------------     *
*     Use with INSTALL/ED Program      *
*                                      *
*    Modified  Apr-May/93              *
*     -- Load & Language entries       *
*    Additional notes Jul/93           *
*     -- 40-col enhanced version       *
*    Use with same issue INSTALL/ED    *
*     and ED/EE files                  *
*    Can use for all current issue     *
*     Vn 5.00 (40 & 80 col)            *
*    Commented for 40-col only         *
*                                      *
*--------------------------------------*
*  Any line beginning with a blank or  *
*  an asterisk is ignored by the       *
*  INSTALL/ED program.  All that you   *
*  need to retain in working copies    *
*  are just the lines with actual      *
*  entries.  Trailing comments may be  *
*  used in all lines except pathname   *
*  and printer codes.  INSTALL/ED puts *
*  the same form of configuration      *
*  block near the start of any         *
*  ED file that is being customized.   *
*  These entries are then used or      *
*  ignored by the entry code in the    *
*  specific version.  The order and    *
*  form of entries in this block do    *
*  not necessarily match that in       *
*  this configuration data file, so it *
*  it is easier to use INSTALL/ED than *
*  to attempt patching ED directly.    *
*--------------------------------------*
*  An abbreviated form is given at the *
*  end of this file.  Even this is     *
*  more than necessary as ultimately   *
*  only the entries, one per line, are *
*  needed, but a few comments will not *
*  exceed minimum 2 sector file size.  *
*--------------------------------------*
*  INSTALL/ED must be loaded in the    *
*  Funnelweb environment, and will     *
*  otherwise immediately return to the *
*  title screen.  Load as an Option 2  *
*  GPL program file.                   *
*                                      *
****************************************
 
*--------------------------------------*
*  Line # 1 --  Y  ->> Bring up user   *
*            select at entry to Editor.*
*           --  N  ->> Bypass user     *
*            select screen unless >    *
*            <space> detected at entry.*
*                                      *
*   Lines 1 - 3 are ignored by the     *
*   baseline 40-column Editor, which   *
*   has only the choice between        *
*   W/P and P/E on the user screen.    *
 
N
 
*--------------------------------------*
*  Line #2 --  1 ->> Default language  *
*           command text, and chars as *
*           loaded by Funnelweb. Uses  *
*           7-bit chars only.          *
*          --  2 ->> Loads language    *
*           command and character      *
*           files as specified later   *
*           language entry.  Uses      *
*           7-bit chars only.          *
*          --  3 ->> All-Characters    *
*           mode.  8-bit characters    *
*           from  CHAR@<1-8> and       *
*           language/command file from *
*           F4TX<A-G>E.                *
*          --  4  ->> TI Euro-Writer   *
*           mode.  Uses character files*
*           CHAR<A-G>1 and command     *
*           files F4TX<A-G>E,          *
*                                      *
*  The first entry is for the Word     *
*  Processor and the second for the    *
*  second for the Program Editor.      *
*  Do NOT space between the entries.   *
*  Ignored by the baseline version.    *
 
11
 
*--------------------------------------*
*  Line #3  --  1  ->> Australia/USA   *
*               2  ->> Britain         *
*               3  ->> France          *
*               4  ->> Deutschland     *
*               5  ->> Italia          *
*               6  ->> Sverige         *
*               7  ->> Nederland       *
*               8  ->> Espana          *
*                                      *
*  The first entry is for the Word     *
*  Processor and the second for the    *
*  Program Editor.  Do NOT space       *
*  between the entries.  Ignored by    *
*  baseline version.                   *
 
11
 
*--------------------------------------*
*  Line #4 -- 0 ->> Ignore help files  *
*             1 ->> Load Help files on *
*                   request            *
 
1
 
*--------------------------------------*
*  Line #5  --  1/2 ->> NTSC/PAL Entry *
*                                      *
*  Entry is ignored by 40-col Editors  *
*  but must be present for correct     *
*  entry counting.                     *
 
1
 
*--------------------------------------*
*  Line #6  --  1/2 ->> NTSC/PAL Exit  *
*                                      *
*  As for line #5 in 40-col versions.  *
 
1
 
*--------------------------------------*
*  Line #7  --  Y/N ->> ERAM / no ERAM *
*                                      *
*  Not currently used in any version.  *
 
Y
 
*--------------------------------------*
*  Line #8 -- 0 ->> implies no path    *
*           entry and the Funnelweb    *
*           utility pathname will be   *
*           installed instead by the   *
*           Editor entry code.         *
*                                      *
*          --  PATHNAME.               *
*                 ->> where this is    *
*            any legitimate hard disk  *
*            path or disk volume name  *
*            (as would be used in a    *
*            BASIC language catalog    *
*            routine).  It MUST end    *
*            with a "." and be less    *
*            than 42 characters long,  *
*            and obviously must not    *
*            start with a "0".         *
*                                      *
*  Not relevant to baseline version    *
*   - leave as 0 for this.             *
 
DSK5.
 
*--------------------------------------*
*  Line #9 --  0 ->> USA TI-Wr tabs    *
*          --  1 ->> Eu/Wr tab records *
*                                      *
*  Forces tab records from Word        *
*  Processor in All-Chars mode to the  *
*  type specified.  This Editor is not *
*  sensitive to tab type, but the      *
*  original TI-Writer and Eu-Wr Vn 2.0 *
*  were fatally incompatible.          *
*  If you are in the habit of using    *
*  All-Chars mode, even without the    *
*  extended characters in <c-,> mode   *
*  this option will allow you to set   *
*  the tab type for any recipients of  *
*  your files so unenlightened as not  *
*  to be using the latest Funnelweb    *
*  editors.                            *
*  This option is currently not        *
*  configurable from the entry screens *
*  and must be set by INSTALL/ED.      *
 
0
 
*--------------------------------------*
*  Line #10 --  Start line with P as   *
*   flag, followed by the printer      *
*   start sequence.  This is to be     *
*   entered as characters using        *
*   special character mode <ctrl-U> as *
*   necessary.  Do not enter           *
*   trailing comments on the line.     *
*   A maximum of 24 characters after   *
*   characters after the P will be     *
*   accepted.  Do NOT space between    *
*   between the P and the codes.       *
 
P
 
*--------------------------------------*
*  Line #11 --  Start line with Q as   *
*   flag, followed by the printer      *
*   reset sequence.                    *
 
Q
 
*--------------------------------------*
*  That's all folks !  INSTALL/ED will *
*  have quit reading the file after    *
*  the last entry                      *
*
****************************************
 
*--------------------------------------*
*  Now for a shorter version, but still*
*  with comments, but quite usable.    *
*--------------------------------------*
*  Comment away, as long as it still   *
*  fits in a minimum size file !!      *
*--------------------------------------*
 
N   User select
11  Mode (1-4)
11  Lang (1-8)
4   Helps (0-4)
1   NTSC/PAL in
1   NTSC/PAL out
Y   ERAM
DSK5.
0   USA Tab record
P
Q