SETDSK_TXT extracted from UPDATE on 31 October 1994

     Purpose: SETDSK is used to set the head step and tracks for the
              FLOPPY controllers.  This command will <not> work with the
              HFDC.  Refer to the HFDC user's manual for proper switch setting.

     Usage:

          

          SETDSK [drive number][head step][tracks]


            [drive number] is from 1 to 4 and is valid ONLY for floppy
                           only controllers.

          

            [head step]    is from 0 to 3.  Vary settings, "usually" 0
                           for optimal performance, but depends upon 

                           floppy type.

          

            [tracks]       valid numbers are 4 or 8 to indicate 40 or
                           80 tracks respectively.

          

          

            Examples:

          

               SETDSK 104  sets drive 1, head step 0, 40 tracks

               SETDSK 228  sets drive 2, head step 2, 80 tracks

               SETDSK 308  sets drive 3, head step 0, 80 tracks
          

          

            Notes:

          

               Must leave only one space between command and options and
               you must not separate the numbers or error report will
               follow.


   WARNING-->  SETDSK parameters are LOST after a WARM BOOT until
               re entered.